Bending matrix BM_60_50_48x85_S15

The BM_60_50_48x85_S15 bending matrix from Pressbrake.tools, a TFI Co. manufacturing site operating since 1965, is a single-groove wide-body die built for heavier-gauge structural bending where deflection control and long tool life under sustained high tonnage are critical. Fabricators and press brake owners can specify this 60 mm body, 50 mm height, 15 mm offset slot tool to form approximately 6 mm mild steel through its 48 mm groove at 85°, placing it at the upper end of the standard sheet metal range. The wider 60 mm body distributes bending forces over a larger footprint for added rigidity, while the 42CrMo construction is hard, precision-ground, and DIN 7168 compliant. This page provides the technical detail needed to confirm the die for production-intensive bending and request press brake tooling enquiries.

Overview

The BM_60_50_48x85_S15 bending matrix from Pressbrake.tools, a TFI Co. manufacturing site operating since 1965, is a single-groove wide-body die built for heavier-gauge structural bending where deflection control and long tool life under sustained high tonnage are critical. Fabricators and press brake owners can specify this 60 mm body, 50 mm height, 15 mm offset slot tool to form approximately 6 mm mild steel through its 48 mm groove at 85°, placing it at the upper end of the standard sheet metal range. The wider 60 mm body distributes bending forces over a larger footprint for added rigidity, while the 42CrMo construction is hard, precision-ground, and DIN 7168 compliant. This page provides the technical detail needed to confirm the die for production-intensive bending and request press brake tooling enquiries.

Key takeaways

• Single-groove wide-body die built for heavier-gauge structural bending with deflection control under sustained high tonnage.

• 42CrMo construction delivers hard, precision-ground tooling compliant with DIN 7168 for extended service life.

• Metal fabricators and press brake owners get 60 mm body rigidity for stable 6 mm mild steel bends.

• Use the 48 mm groove at 85° for production-intensive forming at the upper end of standard sheet metal range.

• TFI Co. press brake tooling manufactured since 1965 supports custom bending enquiries and industrial procurement.

• Single-groove wide-body die built for heavier-gauge structural bending with deflection control under sustained high tonnage.

• 42CrMo construction delivers hard, precision-ground tooling compliant with DIN 7168 for extended service life.

• Metal fabricators and press brake owners get 60 mm body rigidity for stable 6 mm mild steel bends.

• Use the 48 mm groove at 85° for production-intensive forming at the upper end of standard sheet metal range.

• TFI Co. press brake tooling manufactured since 1965 supports custom bending enquiries and industrial procurement.

Specifications

Applications

• Structural steel fabrication

  The BM_60_50_48x85_S15 bending matrix supports heavier-gauge structural bending where its 60 mm body distriutes tonnage to control deflection during long production runs.

• Press brake machine owners

  Machine owners running sustained high-tonnage forming of approximately 6 mm mild steel can specify this die for the 48 mm groove at 85° to keep tooling changeovers minimal.

• Production engineering teams

  Production engineers evaluating upper-end standard sheet metal ranges can confirm the 42CrMo, DIN 7168-compliant construction for precision-ground repeatability under defelction-critical loads.

• Industrial procurement teams

  Tooling buyers sourcing wide-body single-groove dies for fabrication workshops in USA and European industrial markets can procure the BM_60_50_48x85_S15 with the 15 mm offset slot as a direct replacement specification.

• Heavy-gauge sheet metal bending

  Fabricators forming thick plate where standard tooling deflects can use the wider 60 mm body footprint for added rigidity during repeated 85° bends through the 48 mm groove.

• Maintenance and tooling departments

  Maintenance teams replenishing press brake consumables in high-tonnage bending cells can order this hardened 42CrMo die as a long-life replacement for worn wide-body tooling.

• International fabrication workshops

  Metal fabrication shops serving global industrial markets can specify the BM_60_50_48x85_S15 for production-intensive bending where tool life and dimensional stability under load are procurement requirements.

• Structural steel fabrication

  The BM_60_50_48x85_S15 bending matrix supports heavier-gauge structural bending where its 60 mm body distriutes tonnage to control deflection during long production runs.

• Press brake machine owners

  Machine owners running sustained high-tonnage forming of approximately 6 mm mild steel can specify this die for the 48 mm groove at 85° to keep tooling changeovers minimal.

• Production engineering teams

  Production engineers evaluating upper-end standard sheet metal ranges can confirm the 42CrMo, DIN 7168-compliant construction for precision-ground repeatability under defelction-critical loads.

• Industrial procurement teams

  Tooling buyers sourcing wide-body single-groove dies for fabrication workshops in USA and European industrial markets can procure the BM_60_50_48x85_S15 with the 15 mm offset slot as a direct replacement specification.

• Heavy-gauge sheet metal bending

  Fabricators forming thick plate where standard tooling deflects can use the wider 60 mm body footprint for added rigidity during repeated 85° bends through the 48 mm groove.

• Maintenance and tooling departments

  Maintenance teams replenishing press brake consumables in high-tonnage bending cells can order this hardened 42CrMo die as a long-life replacement for worn wide-body tooling.

• International fabrication workshops

  Metal fabrication shops serving global industrial markets can specify the BM_60_50_48x85_S15 for production-intensive bending where tool life and dimensional stability under load are procurement requirements.

Variants

• Single-V Groove Configuration

  A single 48 mm groove at 85° for forming approximately 6 mm mild steel without extra groove complexity.

• 60 mm Wide Body Option

  The 60 mm body width distributes bending forces over a larger footprint for improved deflection control under sustained high tonnage.

• 15 mm Offset Slot Tool

  Features a 15 mm offset slot geometry that positions the workpiece for specific bend line placements in structural work.

• Compatible with Standard Press Brake Clamping

  The 50 mm height and 60 mm body are designed to seat in standard press brake lower beam holders for tooling interchange.

• DIN 7168 Compliant Die

  Precision-ground to DIN 7168 tolerance, confirming consistency for tooling buyers who require defined dimensional standards.

• 42CrMo Hardened Construction

  42CrMo material is hardened for long tool life in production-intensive bending of heavy-gauge sheet metal.

• Single-V Groove Configuration

  A single 48 mm groove at 85° for forming approximately 6 mm mild steel without extra groove complexity.

• 60 mm Wide Body Option

  The 60 mm body width distributes bending forces over a larger footprint for improved deflection control under sustained high tonnage.

• 15 mm Offset Slot Tool

  Features a 15 mm offset slot geometry that positions the workpiece for specific bend line placements in structural work.

• Compatible with Standard Press Brake Clamping

  The 50 mm height and 60 mm body are designed to seat in standard press brake lower beam holders for tooling interchange.

• DIN 7168 Compliant Die

  Precision-ground to DIN 7168 tolerance, confirming consistency for tooling buyers who require defined dimensional standards.

• 42CrMo Hardened Construction

  42CrMo material is hardened for long tool life in production-intensive bending of heavy-gauge sheet metal.

Frequently asked questions

Quality and proof

The BM_60_50_48x85_S15 is produced in 42CrMo construction, hard, precision-ground, and DIN 7168 compliant. Additional material or dimensional certification can be confirmed on request through TFI Co.

Industrial Machines & Steel Blades est. 1965 — supplied across USA and Europe to metal fabricators, press brake machine owners, production engineers, tooling buyers, and industrial procurement teams specifying wide-body dies for heavier-gauge structural bending.

Warranty terms, replacement, and regrind support for this bending matrix are confirmed at enquiry stage, with technical review matched to your production tonnage and tooling condition.

Get a quote

Request your BM_60_50_48x85_S15 quote for deflection-free heavy bending

Notes